The Knightrunner 4X4 RTR features injection-molded grill, mirrors, door handles, wipers, and more to heighten the scale realism of the thermoformed polycarbonate body designed by James Knight of Knight Customs.
Aimed towards the serious RC rock crawler enthusiast, the new Enduro Knightrunner 4x4 RTR is packed full of performance features that are sure to impress.
Keeping it real. The Knightrunner 4X4 RTR features injection-molded grill, mirrors, door handles, wipers, and more to heighten the scale realism of the thermoformed polycarbonate body designed by James Knight of Knight Customs. The extra decal sheet includes additional overlanding graphics and sponsor logos to outfit the Knightrunner 4X4 for a custom look.
Element RC has partnered with industry-leading aftermarket manufacturers to provide the highest level of scale realism possible. These partners include: DeMello Off-road, Front RunnerTM, MagnaflowTM, and General TireTM.
Officially Licensed Tires: Gripping the trail are a set of officially licensed General GrabberTM A/T X tires. All of Element RC's tires are molded in a soft, high-performance rubber that was selected for all-around grip performance and wear characteristics. The General GrabberTM A/T X tires are mounted on Urbine 1.55" beadlock wheels. No more worrying if your RTR tires will come unglued.
Chassis Features
Where scale looks and performance meet. When you want a rig designed with scale looks and performance in mind, you want the all-new Enduro Knightrunner 4x4 RTR overland truck.
Aimed towards the scale adventurer, the Enduro Knightrunner 4X4 boasts many of the same performance features found on many of our other trail proven vehicles.
Stealth(R) X transmission: At the center of the Knightrunner 4X4 chassis is Associated Electrics' revolutionary Stealth(R) X transmission. What makes this transmission different from others is the ability to adjust the front and rear drive ratios independently across three different levels. Out of the box, the Stealth(R) X comes pre-installed with the 5.7% overdrive gears. As an added bonus, the 11.83% overdrive gears are included, but not installed. Available separately are a one-to-one ratio option for those who wish to drive the front and rear equally.
Steering rack: The included aluminum swing rack and steering plates give the IFS suspension a precise, solid feel.
Suspension: Durable injection-molded upper and lower suspension arms with optimized ball cups provide maximum suspension articulation along with modern off-road vehicle suspension scale looks.
Steering blocks: 100% compatible with steering blocks from previous Enduro chassis and allows up to 45deg. of steering.
Threaded aluminum shock bodies: Threaded aluminum and fluid-filled, these shocks keep the vehicle stable on the trail and retain fluid even in the roughest terrain.
Independent front suspension: With durability, performance, agility and scale looks in mind, the engineers at Area 51 Design Works came up with the Independent Front Suspension conversion kit. Now you can get that same kit in an RTR vehicle. Pre-assembled with the same quality and features, this trail truck comes equipped with IFS and is scale ready to tackle rough off-road terrain right out of the box.
Electronics
Like all other Element RC vehicles, the Knightrunner comes fully equipped with performance-driven Reedy Power electronics. The Reedy SC480X ESC with T-plug connector and 16-turn 5-slot brushed motor combo deliver ultra-smooth power to the wheels. Guiding the Knightrunner on trail are the XP130 3-channel 2.4GHz radio and high-torque, metal-gear 1320MG Reedy servo.
Reedy Power crawler motor: The Reedy Power 5-slot 16-turn brushed crawler motor provides ample torque with a smooth power delivery. This allows for slow precise acceleration while maintaining consistent power over rough terrain and obstacles.
Reedy power electronic speed controller (ESC): The water-resistant SC480X brushed ESC is specifically programmed for crawling with proportional forward/reverse, dual auxiliary power output leads, LiPo low-voltage cutoff protections, and T-plug connector.
Packed full of features like these, it's hard to keep the Knightrunner 4X4 RTR on the pavement and off the trails. It's the perfect rig for whatever adventures lie around the next corner. Your journey begins here!
FEATURES
- Knightrunner body thermoformed in high-strength polycarbonate
- Two-piece cab and bed design
- Clear windows
- Dropped bed design
- Injection-molded body accessories (door handles, wipers, mirrors, grill, and snorkel)
- Officially licensed DeMello injection-molded front and rear bumpers
- Officially licensed Front RunnerTM bed rack and tent
- Officially licensed MagnaflowTM exhaust
- Officially licensed 1.55" x 3.85" General GrabberTM A/T X tires
- Decal sheet with additional graphics and logos included
- IFS (Independent Front Suspension)
- Stealth(R) X transmission
- Aluminum steering plates
- Aluminum steering rack
- Integrated servo winch mount
- Adjustable front and rear bumper mounts
- Adjustable injection molded rock sliders
- Threaded aluminum shock bodies
- CMS (Chassis Mounted Servo)
- Universal front drive axles
- Stamped steel frame rails
- Aluminum motor plate
- Optimized ball cups for more fluid axle articulation
- Telescopic driveshafts front and rear
- Extruded aluminum driveshaft splines
- One-piece rear axle design
- Machined input pinion gear
- Metal ring gear
- Machined steel top shaft
- Heavy duty 5mm diameter steel links
- Metal ball bearings included
- Steel 25T servo horn
Please note: Knight(R) Customs, DeMello Off-road, Front RunnerTM, MagnaflowTM, and General TireTM trademarks are used under license.
SPECIFICATIONS
- Power Source: Electric
- Terrain: Off-Road
- Body Style: Truck
- Scale Size: 1:10 Scale
- Assembly Level: Ready-To-Run*
- Length: 462mm (18.19in)
- Width: 236mm (9.29in)
- Wheelbase: 325mm (12.8in)
- Weight: varies
- Internal Gear Ratio: varies
- Drive: 4WD
Please note: * This vehicle is fully assembled and ready to run right out of the box. Requires a battery and charger.
REQUIRED TO COMPLETE
- Battery pack
- Battery charger
- 4 AA batteries for radio